Preparing your pool before summer helps prevent delays, equipment failures, and water-quality problems. Starting early gives you enough time to clean, inspect, and balance everything before regular swimming begins.
Remove and Clean the Pool Cover
Carefully remove leaves and standing water from the cover before taking it off. Clean the cover, allow it to dry, and store it in a protected location.
Inspect the Pool and Equipment
Check the pool surface, tiles, ladders, lights, and fittings for visible damage. Inspect the pump, filter, heater, hoses, and plumbing connections for cracks or leaks.
Restore the Water Level
Add fresh water until the pool reaches the recommended operating level. In most pools, the water should sit near the middle of the skimmer opening.
Start the Filtration System
Clean the baskets, open the necessary valves, and start the pump. Confirm that water is circulating correctly and check the filter pressure.
Test and Balance the Water
Test the pH, alkalinity, chlorine, calcium hardness, and stabilizer levels. Adjust each chemical gradually according to the pool’s size and current readings.
Complete a Thorough Cleaning
Brush the walls, steps, and waterline. Vacuum the pool floor and remove all floating debris. Allow the filtration system to run until the water is clear.
A professional seasonal service can make the opening process easier and ensure your pool is clean, balanced, and ready for summer.